EEE330 Final exam — study guide
Population Ecology · Autumn 2026
This course covers a lot. The exam does not. It asks whether you can think with the core of the course, not whether you remember everything we showed. This guide tells you, lecture by lecture, what that core is. If you can do what is listed here, you are ready.
How the exam works
- When and where. Friday 18 December, 14:00–17:00, room 13J96.
- What it looks like. Two case studies of species you have not met in the course, each followed through several questions, and one short question in which you judge a claim. Every question builds on the information given, as in the lectures, where one owl and one flock of cranes ran through many topics.
- Numbers are given. Where a question needs λ, a sensitivity, an elasticity or a simulation result, it is printed in the question. Your job is to read it, check it and use it.
- Calculation only as in class. You may be asked to do what we did by hand in the lectures: one projection step, one sensitivity by changing one rate, one LTRE contribution, a geometric mean of a few numbers. The numbers are easy. Bring a calculator.
- A formula sheet is printed in the exam (below). You do not need to memorise formulas; you need to know when to use them and what they mean.
- What earns marks. Reasoning: a life cycle that follows the biology, a prediction with its reason, an interpretation that names the rate and the mechanism, an assumption that could fail, a decision you can defend. Short, clear answers are best. A correct number with no interpretation earns little.
Not examined: the papers of the Further reading, R code and the practical worksheets’ code, and the numbers of the examples (you need to know what the cranes, owls or wild boar showed, not their values). The ideas from the practicals are examinable as ideas: for example, why the median future differs from the mean, or why a regression can find density dependence where there is none.
Lecture by lecture
Each lecture ends with a synthesis slide that collects its key points. They are listed here under Know, word for word as on the slide. Be able to lists what you should be able to do with them.
L1 — What population ecology asks
Know: L1 sets out the questions the rest of the course answers; it has no synthesis slide of its own, and nothing from it is examined beyond what the later lectures cover.
Be able to: say through which rates a given threat or intervention would act.
L2 — Life histories and population structure
Know (the synthesis slide at the end of L2):
- A life history is a schedule of survival and reproduction across age.
- Fitness depends on when offspring are produced, not just how many.
- Limited resources force trade-offs among survival, growth and reproduction.
- Trade-offs make individuals of the same age demographically different.
- Life history determines which vital rates most influence population growth.
- Population composition reflects past vital rates and shapes future dynamics.
- The best state structure is the simplest one that keeps the differences that matter and can be estimated.
Be able to: compare two life schedules (which grows faster, and what else you would need to know); place a species on the fast–slow continuum from its rates; say which states a model of a described species needs.
L3 — From life cycle to matrix
Know (the synthesis slide at the end of L3):
- A life-cycle graph shows, for one time step, how each individual in each state contributes to each state at the next census.
- When the census happens decides what each state means and what each reproduction arrow contains.
- Every arrow must span exactly one time step.
- States should be the variables that best predict fate, which need not be age.
- The projection matrix is the life-cycle graph written as a table: each column is “from”, each row is “to”.
- Matrix entries are combinations of lower-level vital rates such as survival, growth and fecundity.
- States can be ages, sizes or breeding status; the graph should follow the biology that decides fate.
Be able to: draw the life-cycle graph of a described species and write its matrix with entries as products of vital rates, for a pre- or post-breeding census; say what each entry means.
L4 — Projection, growth and structure
Know (the synthesis slide at the end of L4):
- λ, r and the doubling time describe the same constant growth.
- A matrix in place of λ and a vector in place of N show what happens inside the population.
- With constant rates, growth and composition settle: λ and the stable structure, the dominant eigenvalue and its eigenvector.
- Populations with the same size and rates can follow different paths before their structure settles: transient dynamics.
- Reproductive value measures each state’s contribution to the future population; long-run size follows the total reproductive value at the start.
- A count gives the population’s growth rate only when the rates are constant and the structure is stable.
Be able to: project one step by hand; convert between λ, r and doubling time; read λ, the stable structure and reproductive values from given output and explain them; explain why a population with λ = 1 can shrink for a while.
L5 — Which rates matter?
Know (the synthesis slide at the end of L5):
- Sensitivity: how much λ changes per small change in an arrow; large when many individuals pass through it (w) and it leads to a valuable state (v).
- Elasticity: the proportional change in λ for a proportional change in an arrow; elasticities add up to 1, and arrows in the same loop share them.
- Managers change vital rates, not matrix entries: the sensitivity of λ to a vital rate adds up its effects through every arrow it enters.
- High leverage does not make a good target on its own: what managers can change, and by how much, decides too.
- Sensitivity and elasticity ask which change would move λ; an LTRE asks which changes did: contribution = difference × sensitivity.
- A rate with a low elasticity can still explain most of an observed change: it changed a lot, and λ is sensitive to it.
Be able to: interpret given sensitivity and elasticity matrices; compute a sensitivity by changing one rate, and with the chain rule for a rate in two entries; compute one LTRE contribution and check that the contributions add up; recommend a management target and defend it.
L6 — Variable environments and small populations
Know (the synthesis slide at the end of L6):
- Growth varies from year to year, though part of that is counting error.
- Where we know the driver, growth follows the environment.
- The long-run rate is the geometric mean: variation itself lowers growth.
- The average future overstates what a typical population does.
- Variation with no known driver we treat as environmental stochasticity.
- The same variation costs most in the rates λ is most sensitive to.
- Runs of bad years raise the risk, even with the same mean and variance.
- A trend in the environment shifts the mean rates.
- Environmental stochasticity hits all together; demographic stochasticity matters when N is small.
- Risk depends on threshold, horizon and model.
Be able to: compute arithmetic and geometric means of a few yearly λ and explain the difference; say which rate’s variation would cost more, given sensitivities and variation; sort examples into environmental or demographic stochasticity; read a quasi-extinction curve.
L7 — Density dependence and regulation
Know (the synthesis slide at the end of L7):
- Density dependence: growth changes with the population’s own numbers, but a count series alone is weak evidence.
- Regulation needs a feedback; limitation is whatever sets the level.
- With density dependence the matrix changes every year; \(K\) is where its λ reaches 1.
- \(K\) comes from the rates and the habitat. Below a threshold there is no equilibrium at all.
- “Density” can be several numbers, each acting on different rates, and differently by season.
- Strong or delayed feedback alone can produce cycles, and at low numbers the feedback can change sign: Allee effects.
- Another species makes a feedback only if it responds to the focal population; its effect still enters through vital rates.
Be able to: say which rate of a described species is likely to depend on density and why; read growth against numbers (\(K\), \(r_{max}\)); explain what changes \(K\); explain why a negative slope of growth on counts is not yet proof of density dependence.
L8 — Harvest
Know (the synthesis slide at the end of L8):
- Harvest is a loss like any other; what matters is which rates it touches.
- Harvest deaths can replace natural deaths or add to them, and compensation stops at the deaths that would have happened anyway.
- Compensation is density dependence at work, through survival, breeding or immigrants.
- A fixed quota can collapse a population; a fixed rate corrects itself.
- Fast species compensate; in slow species adult harvest is mostly additive, and heavy losses can even slow their life down.
- Who is removed matters as much as how many.
- Males and social structure are not free.
- A hunting bag needs effort to say anything about the population, and management can learn as it goes.
Be able to: predict whether harvest of a described species is likely to be compensatory or additive; find the equilibria of a quota and a rate on a recruitment curve and say which are stable; choose which class to harvest from elasticities; criticise a harvest plan.
L9 — Space and dispersal
Added after the lecture.
L10 — Where vital rates come from
Added after the lecture. Not examined: capture–recapture likelihoods and estimation methods (EEE323).
L11 — Population viability and management
Added after the lecture.
The formula sheet
This sheet is printed in the exam.
- Unstructured growth: \(N_{t+1} = \lambda N_t\); \(r = \ln\lambda\); doubling time \(= \ln 2 / r\).
- Projection: \(\mathbf{n}_{t+1} = \mathbf{A}\,\mathbf{n}_t\); columns “from”, rows “to”.
- Sensitivity of λ to entry \(a_{ij}\): \(s_{ij} = \dfrac{v_i\,w_j}{\mathbf{v}\cdot\mathbf{w}}\), with \(\mathbf{w}\) the stable structure and \(\mathbf{v}\) the reproductive values.
- Elasticity: \(e_{ij} = \dfrac{a_{ij}}{\lambda}\,s_{ij}\); \(\sum e_{ij} = 1\).
- Chain rule for a vital rate \(\theta\): \(\dfrac{\partial\lambda}{\partial\theta} = \sum_{ij} s_{ij}\,\dfrac{\partial a_{ij}}{\partial\theta}\).
- Small change: \(\Delta\lambda \approx \dfrac{\partial\lambda}{\partial\theta}\,\Delta\theta\).
- LTRE: contribution of \(\theta\) \(\approx (\theta^{(2)} - \theta^{(1)})\,\dfrac{\partial\lambda}{\partial\theta}\), with the sensitivity midway between the two matrices.
- Geometric mean of \(\lambda_1, \dots, \lambda_T\): \(\left(\prod_t \lambda_t\right)^{1/T}\), or \(\exp(\text{mean of } \ln\lambda_t)\).
- Cost of variation in an entry or rate with sensitivity \(S\) and standard deviation \(\sigma\): \(\lambda - \lambda_s \approx \dfrac{S^2\sigma^2}{2\lambda}\).
- Logistic growth: \(r(N) = r_{max}(1 - N/K)\); added per year \(R(N) = r N (1 - N/K)\), largest (\(rK/4\)) at \(N = K/2\).
- Demographic stochasticity: the year-to-year swing in growth from individual luck shrinks roughly as \(1/\sqrt{N}\).
Practising
A sample exam shows the style; its answers follow in the last week of the course. The in-class questions of each lecture, and their answers at the end of each deck, are the best practice: the exam asks the same kinds of question about new species.